Style and Sustainability Go Hand In Hand

Affordable Options

Like a sine-wave beginning to pick up in speed, we are steadily seeing substantial technological changes that come with greater and greater frequency. As society wobbles on its axis, sometimes drooping into a valley, technology reveals itself as more efficient than ever, silhouetting a peak stylistic and desirable.

Currently, one of the most affordable and efficient technological developments comes in the form of Light-Emitting Diodes, or LEDs. LED lighting is more efficient than traditional filament bulbs, and more dependable. LED lights last on average about fifty times longer than a traditional incandescent bulb.

Granted, LED tech is slightly more expensive at the outset, but in addition to lasting longer, these bulbs also consume less energy to produce the same result. So they last longer, require less energy, and to top it off produce light that isn’t as “hot” as that which comes from a traditional filament bulb.

With traditional lighting options, much of the energy is expended in the form of heat, which quickly heats up the exterior of a bulb and can burn you or set a lampshade on fire. LED tech is much more efficient than that, and more likely to sustainably serve your interests without increasing the heat quotient in a room.

This has the added advantage of environmental friendliness. When all these things are taken together, you end up saving in the long run. You don’t spend as much money on energy for the same apparent amount of “brightness”. You don’t spend as much on replacement bulbs, and you won’t have to worry about things getting accidentally burned.

image

Interesting Applications

According to ATG Electronics, LED interior lights provide “…unmatched long-lasting performance…”, and the facts bear that statement out. Additionally, you are able to use LEDs in a capacity that would not be possible with conventional lighting options. You can drape a cloth or paper cowling over/around an LED to diffuse lighting intensity and spread a certain aura of color through a room.

Stylistic chic of an unmatched variety is possible with LED options. Beyond saving you money, and having a lower impact on the environment due to factors like decreased energy requirements for essentially the same output, going the LED route has a stylistic quality to it that has become increasingly trendy.

Additionally, there are quite a variety of colors in LED schemes, and they have greater customizability than most options. The amount of brightness can be directly controlled by dimmer switches which also mete out the amount of energy which goes to or from a given LED solution—but be advised: you’re going to want a little advice pertaining to which sort of dimmer you buy; research is wise.

The Future Is Now

The new millennium has provided unparalleled options when it comes to technological application. LED options aren’t the only new innovation that is quickly becoming affordable. Solar power has begun to experience unprecedented popularity in recent years, and the list goes on.

From hybrid cars to smartphones, to the cloud, it is more and more possible for normal folks to stylistically transcend their financial situations with burgeoning, cutting-edge tech. Those with relatively tight budgets are now able to enjoy the same kind of privileges previously only available to those whose pockets were bottomless.

If you want to be stylistic and trendy while remaining environmentally conscious and saving money at the same time, going the LED route is just one of many ways you can do precisely this thing. So get online and look at some of the new developments now becoming affordable. You may be surprised.

Factoring Maintenance Into Your Kitchen Planning

Whether you are working in food service or are part of a restaurant group, creating the most functional kitchen possible will often be a function of the type of equipment that you purchase.  Of course, how you modify this equipment to match the needs of your maintenance team is also going to make a difference in how efficient your kitchen ends up being:

As one of the most popular ways to modify kitchen equipment is to set it up to be mobile so that you can clear an area quickly when you need it to be cleaned, here are some different mobility options that can help save you time and money:

Add Casters: When it comes to mobility, food service casters are one of the mainstays of the restaurant industry. It is important to find a good vendor because your workers will be moving equipment that weighs quite a bit on top of whatever casters that you have chosen. Companies like accesscasters.com not only carry a wide variety of standardized casters, they also have several different types of material like polyurethane that can extend or specialize the use of the equipment you have purchased.

Add Extensions: Moving dishwashers and other appliances by putting them on wheels makes cleanup fast. If the appliances do not have a lot of space to move around in, you can additionally consider adding legs that can be easily extended, allowing you to raise the appliance so that you can mop or clean underneath it. If you have space, but would like this type of option, you can always look at adding extendable casters that give you the best of both worlds. Adjustble height casters also give you the ability to match your staff’s comfort zone when it comes to raising tables and other work areas to a level that they can use.

Consider Built-in Space: One restaurant chain has started planning built-in space for each piece of equipment, the idea being that they will be able to put all the equipment away quickly and then clean the combined space quickly and efficently. This option is said to save time and money once it is implemented because each major work area can be cleared quickly.

As time goes on, if your company is located in a metro area that has embraced a new, higher minimum wage, you will likely be looking for ways to increase efficiency. Ensuring that all your equipment can be moved efficiently so that your cleaning crews can clean well is one way that you can start saving money that will allow your to protect your profit margins.

The art of pastel portraiture – Names and works of few revered artists

In order to learn how to paint with pastels, you need not be a professional in design but you definitely require the skill and passion for the same. While there are many types of painters, pastel painters are some of the most common and recently there has been an upsurge on the number of pastel portrait artists. If you’re a painter who paints pastel portraits, you may be looking for enough inspiration in your field so that you can encourage yourself and boost your activities. Here are some pastel painters who have been famous. Let’s take a look at their lives and how they have cultivated themselves into such great painters.

download-32

Alain Voinot

He was born in the year 1954 and resides in France. He is a self-taught pastellist who initially practiced classical design with a clear love from black and white. When he shifted to colour, he chose pastel as his best medium that best fits into his subject matter and style. Followed by a 20 year apprenticeship, he developed his knowledge on pastels and started realizing his strengths and weaknesses. Alain’s favorite theme is landscape but he also excels in drawing portrait size photographs in acrylic colors. According to him, the spirit of an artist tries to approach the beauty and mystery of the world and then interpret it in his own vision. The search for the synthesis motivates him.

Richard Suckling

Richard Suckling started off his early career as an illustrator in London. The last decade has seen an instinctive progression from painting to graphic art to mainly painting with pastels and acrylic. Richard Suckling believes in painting only those on which you have a real passion for. He usually paints in soft acrylics and pastels, mainly seascapes and land and there is a display of his work in West Country galleries. Off late, Richard had written a piece for The Artist Magazine on the brand new techniques of painting.

Francois Malnati

Francois was born is Delle in 1950 and he too is a self-taught artist. Some cities among his influences are Arikha, Wayne Thibaud, Wyeth, Szafran and Levy Dhurmer. He is a person who has a lot of affinity towards realistic painters Robert C. Jackson, Scott Frader and Janet Monafo. He has already won the award for still life painting at the PSEC exhibition in 2015. His personal style represents colorist influences and his work comprises of exploration of contemporary still life based on unusual subject matter and strong design.

Diego Simancas

Diego Simancas was born in Spain in 1958 and he graduated with honours in drawing before the School of Industrial Engineering. From 1987 to 1995, he divided his time between painting and his pharmaceutical work. But since 2000 he concentrated on painting, particularly on portraits. From 2001 started a new phase when he gave way to fantasy and bid goodbye to realism.

Therefore, if you’re wondering about some inspirations in the field of painting, you can definitely seek the same from the painters mentioned above.